Special Tools

1. Lubricate the seal surface of the crankshaft balancer with engine oil.

Note: The crankshaft position sensor system variation learn procedure must be completed whenever the crankshaft is replaced.

2. Install the crankshaft balancer.
3. Use J 37096 holder to hold the flywheel.

Caution: Refer to Special Fastener Caution in the Preface section.

Caution: Refer to Fastener Caution in the Preface section.




4. Install the crankshaft balancer bolt and Tighten the crankshaft balancer bolt to 150 N·m (111 lb ft). Use J 45059 meter to tighten the crankshaft balancer bolt an additional 76 degrees.