Warning: Refer to Cleaning Solvent Warning in the Preface section.
Warning: Refer to Safety Glasses and Compressed Air Warning in the Preface section.
| | Note: Parts that are to be reused must be marked, sorted, and organized for assembly.
|
| • | Clean the components with cleaning solvent. |
| • | Dry the components with compressed air. |
| • | Inspect the valve rocker components for the following: |
| - | Valve rocker arm valve pushrod socket contact surface (1) |
| - | The contact surface must be smooth with no scoring or excessive wear. |
| - | Valve rocker arm roller pivot for binding or damage (2) |
| - | Valve rocker arm valve stem contact surface (3) |
| - | The contact surface should be smooth with no scoring or excessive wear. |
| • | Inspect the valve pushrods for the following: |
| - | Restriction of the oil passage (1) |
| - | Wear or scoring of the end contact surfaces (2) |
| - | The end contact surfaces must be smooth with no scoring or excessive wear. |
| - | Roll the valve pushrod on a flat surface to determine if the valve pushrod is bent. |
