Power Steering Pump Pulley Replacement L26

Tools Required

1. Remove the power steering pump from the engine for clearance. Refer to Power Steering Pump Replacement.



2. Using J 25034-C remove the power steering pump pulley from the power steering pump.

1. Using J 25033-C install the power steering pump pulley to the power steering pump.




Important: 

•	Never use a hammer to install the power steering pulley.

•	The face of the power steering pulley hub must be flush to within 0.25 mm (0.010 in) with the end of the power steering pump driveshaft.

2. Install the power steering pump to the engine. Refer to Power Steering Pump Replacement.
3. Fill the power steering system. Refer to Checking and Adding Power Steering Fluid.
4. Bleed the power steering system. Refer to Power Steering System Bleeding.
5. Inspect the power steering system for leaks. Refer to Power Steering Fluid Leaks.

Power Steering Pump Pulley Replacement LS4

Tools Required

1. Remove the drive belt. Refer to Drive Belt Replacement - Accessory.
2. Using the J 25034-C , remove the pulley from the pump.

1. Using the J 25033-C , install the pulley to the pump.




Important: 

•	Never use a hammer to install the power steering pulley.

•	The face of the power steering pulley hub must be flush to within 0.25 mm (0.010 in) with the end of the power steering pump driveshaft.

2. Install the drive belt. Refer to Drive Belt Replacement - Accessory.