GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2009 🢒 Allure 🢒 Suspension 🢒 Rear Suspension 🢒 Stabilizer Shaft Insulator Replacement

Removal Procedure

    Object Number: 1209606 Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Remove the stabilizer shaft bolt and clamp.
  3. Remove the stabilizer shaft insulator from the stabilizer shaft.

Installation Procedure

    Object Number: 1209606 Size: SH
  1. Install the stabilizer shaft insulator to the stabilizer shaft.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the stabilizer shaft insulator bracket and tighten the bolt to 48 N·m (35 lb ft).
  3. Lower the vehicle.