GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2009 🢒 Allure 🢒 Body Systems 🢒 Fixed and Moveable Windows 🢒 Front Side Door Window Belt Outer Sealing Strip Replacement

Removal Procedure

    Caution: Refer to Paint Damage Caution in the Preface section.


    Object Number: 1363661 Size: SH
  1. Apply masking tape to the door and applique.
  2. Lower the window to the full down position.
  3. Remove the outside rearview mirror. Refer to Power Mirror Replacement.
  4. Remove the outer belt sealing strip screw  (2) located at the rear of the door.

    5. Object Number: 1385553 Size: SH
  5. Release the front outer belt sealing strip retaining clip, by inserting a suitable flat-bladed tool to the front edge and lift upward.
  6. Remove the outer belt sealing strip from the door.

Installation Procedure

    Object Number: 1363661 Size: SH

    Note: When installing the outer belt sealing strip align the molding to the holes properly before pressing the front into place.

  1. Install the outer belt sealing strip to the door.
    2. 1.1. Insert the retaining clip for the outer belt sealing strip into the front hole of the door and push down firmly to lock in place.
    1.2. Install the outer belt sealing strip to pinch-weld flange.

    Caution: Refer to Fastener Caution in the Preface section.

  2. Install the outer belt sealing strip screw (2).

    3. Tighten
    Tighten the screw to 2 N·m (18 lb in).

  3. Install the outside rearview mirror. Refer to Power Mirror Replacement.
  4. Install the front door trim panel. Refer to Front Side Door Trim Panel Replacement.
  5. Inspect the window for proper operation.
  6. Remove the masking.