GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2009 🢒 Allure 🢒 Body Systems 🢒 Vehicle Access 🢒 Rear Compartment Lid Latch Replacement

Removal Procedure

    Object Number: 749299 Size: SH
  1. Open the rear compartment.
  2. Remove the rear compartment lid carpet. Refer to Rear Compartment Lid Inner Panel Trim Replacement.
  3. Use a grease pencil to mark the location of the rear compartment lid latch to the rear compartment lid.
  4. Disconnect the electrical connectors from the rear compartment lid latch.
  5. Disconnect the lock cylinder actuator cable from the lock cylinder.
  6. Remove the rear compartment lid latch to rear compartment lid nuts.
  7. Remove the rear compartment lid latch from the rear compartment lid.

Installation Procedure

    Object Number: 749299 Size: SH
  1. Position the rear compartment lid latch to the alignment marks on the rear compartment lid.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the rear compartment lid latch to rear compartment lid nuts.

    3. Tighten
    Tighten the nuts to 10 N·m (89 lb in).

  3. Connect the electrical connectors to the rear compartment lid latch.
  4. Connect the lock cylinder actuator cable to the lock cylinder.
  5. Install rear compartment lid carpet. Refer to Rear Compartment Lid Inner Panel Trim Replacement.
  6. Close the rear compartment.