Disc Brake Component Specifications. Buick Allure 2009

For 1990-2009 cars only

Makes 🢒 Buick 🢒 2009 🢒 Allure 🢒 Brakes 🢒 Disc Brakes 🢒 Disc Brake Component Specifications

Application	Specification
Application	Metric	English
Front Brake Rotors - With LS4
Rotor Discard Thickness *	28.6 mm	1.26 in
Rotor Maximum Allowable Lateral Runout	0.06 mm	0.002 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Maximum Allowable Thickness Variation	0.025 mm	0.001 in
Rotor Minimum Allowable Thickness After Refinishing	28.72 mm	1.31 in
Rotor Thickness - New	30.0 mm	1.181 in
Front Brake Rotors - Without LS4
Rotor Discard Thickness *	30.7 mm	1.21 in
Rotor Maximum Allowable Lateral Runout	0.06 mm	0.002 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Maximum Allowable Thickness Variation	0.025 mm	0.001 in
Rotor Minimum Allowable Thickness After Refinishing	31.0 mm	1.22 in
Rotor Thickness - New	32.2 mm	1.27 in
Rear Brake Rotors - With LS4
Rotor Discard Thickness *	9.0 mm	0.354 in
Rotor Maximum Allowable Assembled Lateral Runout	0.06 mm	0.002 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Maximum Allowable Thickness Variation	0.025 mm	0.001 in
Rotor Minimum Allowable Thickness After Refinishing	9.35 mm	0368 in
Rotor Thickness - New	11.0 mm	0.433 in
Rear Brake Rotors - Without LS4
Rotor Discard Thickness *	12.5 mm	0.49 in
Rotor Maximum Allowable Lateral Runout	0.06 mm	0.002 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Maximum Allowable Thickness Variation	0.025 mm	0.001 in
Rotor Minimum Allowable Thickness After Refinishing	12.9 mm	0.51 in
Rotor Thickness - New	14.0 mm	0.55 in
* All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum thickness specification.