GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2009 🢒 Allure 🢒 Seats 🢒 Seat Hardware, Trim, and Upholstery 🢒 Child Restraint Tether Anchor Replacement

Removal Procedure

    Object Number: 604202 Size: SH

  1. Remove the rear shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement.

  2. Slide the sound barrier out from under the upper quarter panel trim.
  3. Pull the sound barrier forward to access the tether bolts.
  4. Remove the child seat tether bracket to rear shelf bolts.
  5. Remove the child seat tether brackets from the rear shelf.

Installation Procedure

    Object Number: 604202 Size: SH
  1. Install the child seat tether brackets to the slots in the rear shelf.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the child seat tether bracket to rear shelf bolts.

    3. Tighten
    Tighten the child seat tether bracket to rear shelf bolts to 20 N·m (15 lb ft).

  3. Push the sound barrier back into its original position.
  4. Install the rear shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement.