Preliminary Procedures

1. Remove the front bucket seat. Refer to Front Seat Replacement - Bucket.
2. Re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is removed. Refer to Passenger Presence System Rezeroing.

1

Seat Back Cushion Pocket

2

Seat Back Cushion Panel

Caution: Refer to Fastener Caution in the Preface section.

Procedure

1. Remove the screws from the seat back cushion panel (Qty:2).
2. Pull from the bottom edge of the panel to remove.

Tighten
2 N·m (18 lb in)

3

Head Restraint Assembly

Procedure

Push in the button on the head restraint guides to release the head restraint from the seat.

4

Head Restraint Guide (Qty: 2)

Procedure

Squeeze the bottom of the guide and push upward to remove.

5

Seat Back Cushion Cover

Procedure

Remove the hog rings that attach the seat cushion cover to the seat cushion.

6

Seat Back Cushion Pad

7

Seat Power Lumbar Support Retainer (Qty: 5)

8

Seat Power Lumbar Support Assembly

9

Seat Recliner Handle

Refer to Driver or Passenger Seat Recliner Handle Replacement.

10

Seat Adjuster Finish Cover Screw (Qty: 3)

Tighten
2 N·m (18 lb in)

11

Seat Adjuster Finish Cover

Refer to Front Seat Adjuster Track Finish Cover Replacement.

12

Front Seat Belt Buckle Pretensioner Nut

Tighten
35 N·m (26 lb ft)

13

Front Seat Belt Buckle Pretensioner Assembly

Refer to Seat Belt Buckle Pretensioner Replacement.

14

Seat Cushion Cover

Refer to Front Seat Cushion Cover Replacement.

15

Seat Cushion Pad

Tip
Disconnect electrical connector if equipped with passenger presence system.

16

Seat Cushion Frame Bolt (Qty: 4)

Tighten
25 N·m (18 lb ft)

17

Seat Cushion Frame Assembly

18

Front Seat Adjuster

19

Seat Back Cushion Frame Bolt (Qty: 4)

Tighten
25 N·m (18 lb ft)

20

Seat Back Cushion Frame Assembly