GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2009 🢒 Allure 🢒 Preface 🢒 Dangers, Warnings, and Cautions 🢒 Engine Mount Strut Replacement - Right Side

Removal Procedure

    Object Number: 1210280 Size: SH
  1. If equipped with a L26 engine, remove the bolt and the nut from the right engine mount strut at the right engine mount strut bracket on the engine.

    2. Object Number: 1210282 Size: SH
  2. If equipped with a L32 engine, remove the bolt and the nut from the right engine mount strut at the right engine mount strut bracket on the engine.

    3. Object Number: 97613 Size: SH
  3. Remove the bolt and the nut from the right engine mount strut at the right engine mount strut bracket on the upper radiator support.
  4. Remove the engine mount strut.
  5. Inspect the rubber in the engine mount strut for the following conditions:
    6. • Hardness
    • Splitting
    • Cracking

Installation Procedure

    Object Number: 97613 Size: SH
  1. Install the engine mount strut.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the bolt and the nut to the right engine mount strut at the right engine mount strut bracket on the upper radiator support.

    3. Tighten
    Tighten the engine mount strut bolt to 48 N·m (35 lb ft).


    Object Number: 1210280 Size: SH
  3. With a L26 Engine, install the bolt and the nut to the right engine mount strut at the right engine mount strut bracket on the engine.

    4. Tighten
    Tighten the engine mount strut nut to 48 N·m (35 lb ft).


    Object Number: 1210282 Size: SH
  4. With a L32 Engine, install the bolt and the nut to the right engine mount strut at the right engine mount strut bracket on the engine.

    5. Tighten
    Tighten the engine mount strut nut to 48 N·m (35 lb ft).