GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2009 🢒 Allure 🢒 General Information 🢒 General Information 🢒 Stabilizer Shaft Link Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.

    2. Object Number: 236116 Size: SH
  2. Remove the stabilizer shaft link nut from the stabilizer shaft link (1) and the stabilizer shaft (2).

    3. Object Number: 614968 Size: SH
  3. Remove the stabilizer shaft link nut (1) from the stabilizer shaft link (2) and the strut.
  4. Remove the stabilizer shaft link (2) from the vehicle.

Installation Procedure

    Object Number: 236116 Size: SH
  1. Install the stabilizer shaft link (1) to the vehicle.
  2. Connect the stabilizer shaft link (1) to the stabilizer shaft (2).

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the stabilizer shaft link nut to the stabilizer shaft link (1) and the stabilizer shaft (2).

    4. Tighten
    Tighten the nut to 50 N·m (37 lb ft).


    Object Number: 614968 Size: SH
  4. Connect the stabilizer shaft link (2) to the strut.
  5. Install the stabilizer shaft link nut (1) to the stabilizer shaft link (2) and the strut.

    6. Tighten
    Tighten the nut to 52 N·m (38 lb ft).

  6. Lower the vehicle.