WIPER BLADE CHATTER/'A' SERIES NEW ARM/BLADE REPLACEMENT

TO REDUCE WINDSHIELD WIPER BLADE CHATTER ON 1983 "A" STYLES A FOUR DEGREE TWIST TO THE BLADE ATTACHING END OF THE WIPER HAS BEEN INCORPORATED INTO PRODUCTION THE FOURTH WEEK OF MARCH, 1983

THE NEW ARM ASSEMBLIES (20467903 RH AND 20467904 LH FOR BUICK AND 20467906 RH AND 20467905 LH FOR CHEV, PONT, AND OLDS ) CAN BE IDENTIFIED BY A "4" FORMED INTO THE UNDER SURFACE OF THE WIPER ARM DIE CAST BASE. (SEE ILLUSTRATION)

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.