FRONT/REAR BUMPER FASCIA WARPED OR RIPPLED (NEW P/N)

MODELS AFFECTED: 1984-1987 BUICK CENTURYS

Customer comments have been received that the front or rear bumper fascia top horizontal surfaces are warped on the subject vehicles.

Service correction can be accomplished by installing a revised fascia. The revised fascias have enlarged attaching holes to eliminate stress and are made of stiffer material. The front fascia Part Number is 25509104 and the rear Part Number is 25515030.

Use applicable labor time and number.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.