REAR LICENSE PLATE LOOSE REPLACE RETAINING SCREWS

VEHICLES AFFECTED: 1990 BUICK A-CARS

APPLICATION: 1990 Buick Century Models between VIN 450679 and 465932

CONDITION: Rear license plate retaining screws do not provide adequate retention of real license plate.

CAUSE: Real license plate retaining screws are incorrect for size of holes in fascia.

CORRECTION: Replace existing license plate retaining screws with new screws, P/N 11508154.

IMPORTANT: Use P/N 11508154 for this application. Common grade screws may rust.

Use the most applicable Labour Operation and Time from the Canadian Labour Time Guide.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.