GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 164801  Size: SH
  1. Remove the oil pan. Refer to Oil Pan Replacement .

  2. Object Number: 164803  Size: SH
  3. Remove the filter. Remove the lip ring seal pressed into the case only if replacement is necessary.
  4. Inspect the screen for the following foreign material:
  5. • Inspect for metal particles.
    • Inspect for clutch facing material.
    • Inspect for rubber particles.
    • Inspect for engine coolant.
  6. Determine the source of the contamination if foreign material is evident.
  7. Correct the source of the contamination.
  8. Use solvent to clean the screen.
  9. Blow-dry the screen.

Installation Procedure


    Object Number: 164802  Size: SH
  1. Install the seal. Install a new lip ring seal into the case if the seal was previously removed.

  2. Object Number: 164803  Size: SH
  3. Install a new filter if required.

  4. Object Number: 164801  Size: SH
  5. Install the oil pan. Refer to Oil Pan Replacement .