GM Service Manual Online
For 1990-2009 cars only

Diagnostic Trouble Code (DTC) Identification, 4T65-E, created for '97 Hcar

DTC

Description

DTC Type

Default Action

P0218

Automatic Transmission Fluid Overtemperature

D

    • DTC P0218 is stored in PCM memory
    • Disable shift adapts

P0502

Vehicle Speed Sensor Circuit Low Input

B

    • DTC P0502 stores in PCM memory
    • Maximum line pressure
    • Disable shift adapts
    • Calculate VSS from ISS and commanded gear

P0503

Vehicle Speed Sensor Circuit Performance

B

    • DTC P0503 is stored in PCM memory
    • Maximum line pressure
    • Disable shift adapts
    • Calculate VSS from ISS and commanded gear

P0560

System Voltage Malfunction

D

    • DTC P0560 is stored in PCM memory
    • Default to 3rd gear
    • Inhibit TCC

P0711

Automatic Transmission Fluid Temperature Sensor Circuit Performance

B

    • DTC P0711 is stored in PCM memory
    • Disable shift adapts
    • The PCM calculates a default TFT from the ECT and the IAT.

P0712

Automatic Transmission Fluid Temperature Sensor Circuit Low Input

D

    • DTC P0712 is stored in PCM memory
    • Disable shift adapts
    • The PCM calculates a default TFT from the ECT and the IAT.

P0713

Automatic Transmission Fluid Temperature Sensor Circuit High Input

D

    • DTC P0713 is stored in PCM memory
    • Disable shift adapts
    • The PCM calculates a default TFT from the ECT and the IAT.

P0716

Automatic Transmission Input Speed Sensor Circuit Performance

B

    • DTC P0716 is stored in PCM memory
    • Disable shift adapts

P0717

Automatic Transmission Input Speed Sensor Circuit No Signal

B

    • DTC P0717 is stored in PCM memory
    • Disable shift adapts

P0719

TCC Brake Switch Circuit Low

D

    • DTC P0719 is stored in PCM memory
    • Disregard brake switch input for TCC operation under the following conditions:
       - The throttle position is greater than 6%.
       - The vehicle speed is greater than 70 km/h (44 mph).
       - The throttle position was previously greater than 12% while the vehicle speed was greater than 75 km/h (47 mph).
       - The brake switch has not been OFF for more than 2 seconds during this ignition cycle.

P0724

TCC Brake Switch Circuit High

D

    • DTC P0724 is stored in PCM memory
    • Disable shift adapts
    • Maximum line pressure

P0730

Undefined Gear Ratio

D

    • DTC P0730 is stored in PCM memory
    • Maximum line pressure
    • Disable shift adapts

P0741

Torque Converter Clutch System Stuck OFF

B

    • DTC P0741 is stored in PCM memory
    • Disable shift adapts
    • Inhibit TCC
    • Inhibit 4th gear in Hot Mode

P0742

Torque Converter Clutch System Stuck ON

A

    • DTC P0742 is stored in PCM memory
    • Disable shift adapts
    • TCC commanded ON at maximum capacity

P0748

Pressure Control Solenoid Valve Electrical

D

    • DTC P0748 is stored in PCM memory
    • Maximum line pressure
    • Disable shift adapts

P0751

1-2 Shift Solenoid Valve Performance

B

    • DTC P0751 is stored in PCM memory
    • Maximum line pressure
    • Inhibit 3-2 downshifts when the vehicle speed is greater than 48 km/h (30 mph)
    • Disable shift adapts

P0753

1-2 Shift Solenoid Valve Electrical

A

    • DTC P0753 is stored in PCM memory
    • Maximum line pressure
    • Inhibit 3-2 downshifts when the vehicle speed is greater than 48 km/h (30 mph)
    • Disable shift adapts

P0756

2-3 Shift Solenoid Valve Performance

A

    • DTC P0756 is stored in PCM memory
    • Maximum line pressure
    • Default to 3rd gear
    • Inhibit TCC
    • Disable shift adapts

P0758

2-3 Shift Solenoid Valve Electrical

A

    • DTC P0758 is stored in PCM memory
    • Maximum line pressure
    • Default to 3rd gear
    • Inhibit TCC
    • Disable shift adapts

P1810

Automatic Transmission Fluid Pressure Manual Valve Position Switch Circuit Malfunction

B

    • DTC P1810 is stored in PCM memory
    • Maximum line pressure
    • The PCM assumes D4 for shifting
    • Disable shift adapts

P1811

Maximum Adapt and Long Shift

D

    • DTC P1811 is stored in PCM memory
    • Maximum line pressure
    • Disable shift adapts

P1860

Torque Converter Clutch Pulse Width Modulation Solenoid Valve Electrical

A

    • DTC P1860 is stored in PCM memory
    • Disable shift adapts
    • Inhibit TCC
    • Inhibit 4th gear in Hot mode

P1887

Torque Converter Clutch Release Switch Circuit Malfunction

B

    • DTC P1887 is stored in PCM memory
    • Disable shift adapts
    • Inhibit TCC
    • Inhibit 4th gear in Hot mode

DTC Types:

  • A-Emission-related, turns the MIL ON after the first failure.
  • B-Emission-related, turns the MIL ON after two consecutive trips with failure.
  • D-Non-emission-related, no lamps.