GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

Tool Required

J 34757 Snap Ring Tool

  1. Remove the case extension housing. Refer to Case Extension Replacement .

  2. Object Number: 10518  Size: SH
  3. Remove the output shaft retaining clip at the differential.
  4. Remove the output shaft through the left wheel opening.

  5. Object Number: 10593  Size: SH
  6. Inspect the output shaft for damage.

Installation Procedure


    Object Number: 10607  Size: SH
  1. Install the output shaft through the left wheel opening.

  2. Object Number: 10518  Size: SH
  3. Install the output shaft retaining clip at the differential.
  4. Install the case extension housing. Refer to Case Extension Replacement .