GM Service Manual Online
For 1990-2009 cars only

4T65-E Automatic Transmission Wiring Harness Assembly Check (created for 97 Hcar)

Step

Action

Value(s)

Yes

No

1

  1. Install J 39775 Jumper Harness on the transmission 20-way connector, if needed.
  2. Using J 39200 DVOM and J 35616-A Connector Test Adapter Kit, measure the resistance between terminals A and E (1-2 Shift Solenoid Valve).

Is the resistance within the values indicated?

19-24ohms at 20°C (68°F)

24-31ohms at 88°C (190°F)

Go to Step 3

Go to Step 2

2

  1. Disconnect the internal transmission harness from the 1-2 Shift Solenoid Valve.
  2. Using J 39200 DVOM, measure the resistance of the 1-2 Shift Solenoid Valve.

Is the resistance within the values indicated?

19-24ohms at 20°C (68°F)

24-31ohms at 88°C (190°F)

Go to Step 16

Go to Step 18

3

Measure the resistance between terminals B and E (2-3 Shift Solenoid Valve).

Is the resistance within the values indicated?

19-24ohms at 20°C (68°F)

24-31ohms at 88°C (190°F)

Go to Step 5

Go to Step 4

4

  1. Disconnect the internal transmission harness from the 2-3 Shift Solenoid Valve.
  2. Using J 39200 DVOM, measure the resistance of the 2-3 Shift Solenoid Valve.

Is the resistance within the values indicated?

19-24ohms at 20°C (68°F)

24-31ohms at 88°C (190°F)

Go to Step 16

Go to Step 18

5

Measure the resistance between terminals T and E (TCC PWM Sol. Valve).

Is the resistance within the values indicated?

10-12ohms at 20°C (68°F)

13-15ohms at 88°C (190°F)

Go to Step 7

Go to Step 6

6

  1. Disconnect the internal transmission harness from the TCC PWM Sol. Valve.
  2. Using J 39200 DVOM, measure the resistance of the TCC PWM Sol. Valve.

Is the resistance within the values indicated?

10-12ohms at 20°C (68°F)

13-15ohms at 88°C (190°F)

Go to Step 16

Go to Step 18

7

Measure the resistance between terminals C and D (PC Sol. Valve).

Is the resistance within the values indicated?

3-5ohms at 20°C (68°F)

5-6ohms at 88°C (190°F)

Go to Step 9

Go to Step 8

8

  1. Disconnect the internal transmission harness from the PC Sol. Valve.
  2. Using J 39200 DVOM, measure the resistance of the PC Sol. Valve.

Is the resistance within the values indicated?

3-5ohms at 20°C (68°F)

5-6ohms at 88°C (190°F)

Go to Step 16

Go to Step 18

9

Measure the resistance between terminals S and V (ISS).

Is the resistance within the values indicated?

893-1127ohms at 20°C (68°F)

1132-1428ohms at 88°C (190°F)

Go to Step 11

Go to Step 10

10

  1. Disconnect the internal transmission harness from the ISS.
  2. Using J 39200 DVOM, measure the resistance of the ISS.

Is the resistance within the values indicated?

893-1127ohms at 20°C (68°F)

1132-1428ohms at 88°C (190°F)

Go to Step 16

Go to Step 18

11

Measure the resistance between terminals M and L (TFT).

Is the resistance within the values indicated?

3164-3867ohms at 20°C (68°F)

225-285ohms at 88°C (190°F)

Go to Step 13

Go to Step 12

12

  1. Disconnect the internal transmission harness from the TFT.
  2. Using J 39200 DVOM, measure the resistance of the TFT.

Is the resistance within the values indicated?

3164-3867ohms at 20°C (68°F)

225-285ohms at 88°C (190°F)

Go to Step 16

Go to Step 18

13

Using J 39200 DVOM and J 35616-A Connector Test Adapter Kit, measure the resistance of the internal transmission harness from pins A, B, C, D, E, and T of the transmission 20-way connector to the transmission case.

Is the resistance more than shown?

250Kohms

Go to Step 14

Go to Step 17

14

Using J 39200 DVOM and J 35616-A Connector Test Adapter Kit, measure the resistance of the internal transmission harness from pins L and M of the transmission 20-way connector to the transmission case.

Is the resistance more than shown?

20Mohms

Go to Step 15

Go to Step 17

15

Using J 39200 DVOM and J 35616-A Connector Test Adapter Kit, measure the resistance of the internal transmission harness from pins S and V of the transmission 20-way connector to the transmission case.

Is the resistance more than shown?

10Mohms

No problem found, exit table

Go to Step 17

16

Inspect for high resistance:

    • Inspect the transmission wiring for poor electrical connections at the transmission 20-way connector and at the component connector.
    • Look for possible bent, backed out, deformed, or damaged terminals.
    • Check for weak terminal tension.

Was the condition found and corrected?

--

Verify repair and Go to Step 1

Go to Step 17

17

Replace the internal wiring harness.

Is the replacement complete?

--

Verify repair and Go to Step 1

--

18

Replace the component.

Is the replacement complete?

--

Verify repair and Go to Step 1

--