Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Lighting System Diagnostic System Check? | -- | Go to Step 2 | |
2 |
Are the high beam headlamps on? | -- | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 |
3 | Disconnect the headlamp switch. Using a test lamp connected to a known good ground, probe the headlamp switch high beam circuit. Does the test lamp turn on? | -- | Go to Step 5 | Go to Step 4 |
4 | Repair a poor connection or an open in the headlamp high beam circuit. Refer to Circuit Testing and Wiring Repairs in Wiring Systems Has the repair been made? | -- | Go to Step 6 | -- |
5 | Replace the headlamp switch. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle in Steering Wheel and Column - Tilt. Has the repair been made? | -- | Go to Step 6 | -- |
6 | Operate the system in order to verify the repair. Did you correct the condition? | -- | Go to Step 2 |
