- Connect the inflatable
restraint side impact module - LF connector (4) located under the driver
seat.
- Install the connector position assurance (CPA) to the side impact
module - LF connector (4).
- Connect the inflatable
restraint IP module connector located to the right of the steering column.
- Install the CPA to the IP module connector.
- Connect the inflatable
restraint steering wheel module coil connector located at the base of the
steering column.
- Install the CPA to the steering wheel module coil connector.
- Install the LH insulator panel.
- Install the AIR BAG Fuse.
- Install the IP fuse block access door.
- Staying well away from all inflator modules, turn ON the ignition.
10.1. | The AIR BAG indicator will flash seven times. |
10.2. | The AIR BAG indicator will then turn OFF. |
- Perform
Diagnostic System Check - SIR
if the AIR BAG indicator does not operate as described.