GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 698627  Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the left inner rear fender.
  3. Disconnect the evaporative emission (EVAP) vent valve electrical connector (1).
  4. Disconnect the vent hose (4) from the EVAP vent valve.
  5. Remove the EVAP vent valve from the bracket (2).

Installation Procedure


    Object Number: 698627  Size: SH
  1. Install the EVAP vent valve on to the bracket (2).
  2. Connect the vent hose (4) to the EVAP vent valve.
  3. Connect the EVAP vent valve electrical connector (1).
  4. Install the left inner rear fender.
  5. Lower the vehicle.