GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 689941  Size: SH
  1. Remove the front door trim panel. Refer to Front Side Door Trim Panel Replacement in Doors.
  2. Remove the screws from the front speaker.

  3. Object Number: 689943  Size: SH
  4. Remove the front speaker from the door panel by sliding out from the retainers.

Installation Procedure


    Object Number: 689943  Size: SH
  1. Align the front speaker to the retainers on the front door trim panel.

  2. Object Number: 689947  Size: SH
  3. Press the front speaker into the speaker retainers until fully seated.

  4. Object Number: 689941  Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  5. Install the screws to the front speaker.
  6. Tighten
    Tighten the front door speaker retaining screws to 2 N·m (18 lb in).

  7. Install the front door trim panel. Refer to Front Side Door Trim Panel Replacement in Doors.