Remote Mirror Replacement for Buick Century 2001

1. Remove the front door trim panel. Refer to Front Side Door Trim Panel Replacement .



2. Disconnect the mirror remote cable from the front door trim panel.
3. Remove the mirror reinforcement cover.
4. Remove the mirror nuts.
5. Remove the mirror from the front door.

1. Install the mirror remote cable through the opening in the front door.
2. Position the mirror to the front door.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Install the mirror nuts.

Tighten
Tighten the nuts to 10 N·m (89 lb in).

4. Install the mirror reinforcement cover.
5. Connect the mirror remote cable to the front door trim panel.
6. Install the front door trim panel. Refer to Front Side Door Trim Panel Replacement .