Removal Procedure
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
in General Information.
- Remove the engine oil drain plug and drain the engine oil.
- Disconnect the engine oil level sensor
electrical connector.
- Remove the bolt from the engine oil level sensor.
- Remove the engine oil level sensor from the oil pan.
Installation Procedure
- Install the engine oil level sensor to
the oil pan.
Notice: Refer to Fastener Notice in the Preface section.
- Install the engine oil level sensor bolt.
Tighten
Tighten the bolt to 10 N·m (89 lb in).
- Connect the engine oil level sensor electrical connector.
- Install the engine oil pan drain plug.
Tighten
Tighten the plug to 30 N·m (22 lb ft).
- Lower the vehicle.
- Fill the crankcase with engine oil. Refer to
Engine Oil and Oil Filter Replacement
.