GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 12287  Size: SH
  1. Remove the left instrument panel sound insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side in Instrument Panel, Gages and Console.
  2. Remove the accelerator cable (5) from the accelerator pedal (1).
  3. Squeeze the accelerator cable cover tangs and push the accelerator cable through the cowl (4).

  4. Object Number: 319387  Size: SH
  5. Remove the cruise control cable from the throttle body lever.
  6. Remove cruise control cable from the bracket.

  7. Object Number: 12717  Size: SH
  8. Remove the accelerator cable from the retaining clip.

  9. Object Number: 12735  Size: SH
  10. Remove the accelerator cable from the throttle body lever.
  11. Remove the accelerator cable from the accelerator cable bracket.

  12. Object Number: 12734  Size: SH
  13. Remove the accelerator cable from vehicle noting cable routing.

Installation Procedure


    Object Number: 12734  Size: SH

    Notice: Do not route flexible components (hoses, wires, conduits, etc.) within 50 mm (2 in) of moving parts unless flexible components can be securely fastened. This is necessary in order to prevent possible interference and damage to the component.

  1. Install accelerator cable using the routing noted during removal.

  2. Object Number: 12287  Size: SH
  3. Install the accelerator cable through the cowl. (4).
  4. Install the accelerator cable (5) to the accelerator pedal lever (1).
  5. Seat the snap retainer in the accelerator pedal lever.

  6. Object Number: 12735  Size: SH
  7. Install the accelerator cable to the throttle body lever.
  8. Install the accelerator cable to the accelerator cable bracket.

  9. Object Number: 319387  Size: SH
  10. Install the cruise control cable to the throttle body lever.
  11. Install the cruise control cable to the bracket.

  12. Object Number: 12717  Size: SH
  13. Install the accelerator cable to the retaining clip.
  14. Inspect for complete throttle opening and closing positions by operating the accelerator pedal. Also inspect for poor carpet fit under the accelerator pedal.
  15. Install the left instrument panel sound insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side in Instrument Panel, Gages and Console.