GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

  2. Object Number: 357447  Size: SH
  3. Remove the left and right side stabilizer shaft insulator bracket bolts.
  4. Remove the left and right side stabilizer shaft insulator brackets.

  5. Object Number: 174594  Size: SH
  6. Remove the left and right side stabilizer shaft insulators (1) from the stabilizer shaft (2).

Installation Procedure


    Object Number: 174594  Size: SH
  1. Install the left and right side stabilizer shaft insulators (1) to the stabilizer shaft (2).

  2. Object Number: 357447  Size: SH
  3. Install the left and right side stabilizer shaft insulator brackets.
  4. Notice: Refer to Fastener Notice in the Preface section.

  5. Install the left and right side stabilizer shaft insulator bracket bolts.
  6. Tighten
    Tighten the stabilizer shaft insulator bracket bolts to 52 N·m (38 lb ft).

  7. Lower the vehicle.