Removal Procedure
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
in General Information.
- Remove
the stabilizer shaft link nut from the stabilizer shaft link (1) and the stabilizer
shaft (2).
- Remove the stabilizer shaft link nut from the stabilizer shaft link (1)
and the strut.
- Remove the stabilizer shaft link (1) from the vehicle.
Installation Procedure
- Install
the stabilizer shaft link (1) to the vehicle.
- Connect the stabilizer shaft link (1) to the stabilizer shaft (2).
Notice: Refer to Fastener Notice in the Preface section.
- Install the stabilizer shaft link nut to the stabilizer shaft link (1)
and the stabilizer shaft (2).
Tighten
Tighten the nut to 52 N·m (38 lb ft).
- Connect the stabilizer shaft link (1) to the strut.
- Install the stabilizer shaft link nut to the stabilizer shaft link (1)
and the strut.
Tighten
Tighten the nut to 52 N·m (38 lb ft).
- Lower the vehicle.