Wipers Always On. Buick Century 2003

For 1990-2009 cars only

Makes 🢒 Buick 🢒 2003 🢒 Century 🢒 Body and Accessories 🢒 Wipers/Washer Systems 🢒 Wipers Always On

Step	Action	Yes	No
Schematic Reference: Wiper/Washer Schematics Connector End View Reference: Wiper/Washer Connector End Views
1	Did you review the Wiper/Washer System Description and Operation and perform the necessary inspections?	Go to Step 2	Go to Symptoms - Wiper/Washer Systems
2	Turn the ignition ON. Operate the windshield wiper/washer switch in all of the switch positions. Turn the windshield wiper/washer switch OFF. Are the windshield wipers always on?	Go to Step 3	Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems
3	Turn the ignition OFF while the wiper arms are in the up position. Disconnect the inline harness connector C201. Remove the connector terminal row E from the steering column harness connector half. Connect the inline harness connector C201. Turn the ignition ON. Are the windshield wipers always on?	Go to Step 4	Go to Step 7
4	Disconnect the windshield wiper motor connector. Test the windshield wiper switch signal 1 circuit for a short to voltage. Refer to Circuit Testing and to Wiring Repairs in Wiring Systems. Did you find and correct the condition?	Go to Step 11	Go to Step 5
5	Test the windshield wiper switch signal 2 circuit for a short to voltage. Refer to Circuit Testing and to Wiring Repairs in Wiring Systems. Did you find and correct the condition?	Go to Step 11	Go to Step 6
6	Test the windshield wiper motor high speed circuit for a short to voltage. Refer to Circuit Testing and to Wiring Repairs in Wiring Systems. Did you find and correct the condition?	Go to Step 11	Go to Step 9
7	Inspect for poor connections at the windshield wiper/washer switch. Refer to Testing for Intermittent Conditions and Poor Connections and to Connector Repairs in Wiring Systems. Did you find and correct the condition?	Go to Step 11	Go to Step 8
8	Replace the windshield wiper/washer switch. Refer to Turn Signal Multifunction Switch Replacement in Steering Wheel and Column. Is the repair complete?	Go to Step 11	--
9	Inspect for poor connections at the windshield wiper motor. Refer to Testing for Intermittent Conditions and Poor Connections and to Connector Repairs in Wiring Systems. Did you find and correct the condition?	Go to Step 11	Go to Step 10
10	Replace the windshield wiper motor module. Refer to Wiper Motor Cover Replacement . Is the repair complete?	Go to Step 11	--
11	Operate the system in order to verify the repair. Did you correct the condition?	System OK	Go to Step 3