Removal Procedure
- Remove the rear shelf trim panel. Refer to
Rear Window Shelf Trim Panel Replacement
in Interior Trim.
- Use a small wide-bladed plastic tool to release
the adhesive. Remove the global positioning system (GPS) antenna from the rear shelf.
- Disconnect the GPS antenna cable connector.
- Clean the adhesive residue from the rear shelf using a razor blade, an
isopropyl alcohol pad, and a clean lint-free cloth.
Installation Procedure
- Clean the surface of the rear shelf in the GPS
antenna mounting location, using an isopropyl alcohol pad and a clean lint-free cloth.
Important: Do not touch the adhesive backing.
- Remove the protective backing from the adhesive of the GPS antenna.
- Install the GPS antenna to the rear shelf surface.
Press the GPS antenna into place for approximately 30 seconds until fully
seated.
- Connect the GPS antenna cable connector.
- Install the rear shelf trim panel. Refer to
Rear Window Shelf Trim Panel Replacement
in Interior Trim.