GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2003 🢒 Century 🢒 Body and Accessories 🢒 Instrument Panel, Gages, and Console 🢒 Front Floor Console Rear Compartment Door Replacement

Removal Procedure

    Object Number: 639912 Size: SH
  1. Raise the front floor console armrest.
  2. Remove the screws from the front floor console armrest hinge at the front floor console armrest.

    3. Object Number: 639911 Size: SH
  3. Remove the front floor console armrest from the front floor console.

Installation Procedure

    Object Number: 639911 Size: SH
  1. Install the front floor console armrest to the hinge at the front floor console.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.


    Object Number: 639912 Size: SH
  2. Install the screws to the front floor console armrest hinge.

    3. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  3. Lower the front floor console armrest.