GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2003 🢒 Century 🢒 Body and Accessories 🢒 Bumpers 🢒 Front Fog Lamp Replacement

Removal Procedure

    Object Number: 814141 Size: SH
  1. Remove the front bumper fascia deflactor. Refer to Front End Fascia Deflector Replacement in Bumpers.
  2. Disconnect the electrical connector from the front fog lamp assembly.

    3. Object Number: 814142 Size: SH
  3. Remove the fog lamp bulb/socket from the fog lamp by rotating counterclockwise.

    4. Object Number: 324213 Size: SH
  4. Remove the front fog lamp nuts from the front bumper impact bar.
  5. Remove the front fog lamp assembly from the vehicle.

Installation Procedure

    Object Number: 324213 Size: SH
  1. Position the front fog lamp assembly to the front bumper impact bar.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the front fog lamp nuts to the front bumper impact bar.

    3. Tighten
    Tighten the nuts to 10 N·m (89 lb in).


    Object Number: 814142 Size: SH
  3. Install the fog lamp bulb/socket to the fog lamp by rotating clockwise.

    4. Object Number: 814141 Size: SH
  4. Connect the electrical connector to the front fog lamp assembly.
  5. Install the front bumper fascia deflactor. Refer to Front End Fascia Deflector Replacement in Bumpers.
  6. Check and adjust the front fog lamp aim as necessary. Refer to Fog Lamp Aiming .