Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover

1. Remove the front door window belt outside sealing strip. Refer to Front Side Door Window Outer Sealing Strip Replacement .
2. Using the J 38778 , remove the front door window reveal molding push-in retainer.



3. Using a small flat-bladed tool, release the retaining clips while pulling front door window reveal molding from the front door.
4. Remove the front door window reveal molding from the front door.

Important: Ensure the plastic clip retainers are not damaged prior to reinstallation of the front door window reveal molding. Replace any broken clips.

1. Position the front door window reveal molding to the front door.
2. Press the front door window reveal molding plastic retaining clips to the front door until fully seated.
3. Install the front door window reveal molding push-in retainer.
4. Install the front door window belt outside sealing strip. Refer to Front Side Door Window Outer Sealing Strip Replacement .