Removal Procedure
- Lower the rear door window.
- Remove the rear door trim panel. Refer to
Rear Side Door Trim Panel Replacement
.
- Lift the rear door window inner belt sealing strip off of the weld flange.
Installation Procedure
Important:
• | Ensure the rear end of the strip is inserted into the gap formed by the weatherstrip and the door inner panel. |
• | Ensure the rear end of the strip is flush to the rear leg of the weatherstrip. |
• | Ensure the rear end of the strip does not interfere with the path of the window. |
- Install the rear door window inner belt sealing strip to the weld flange, pressing firmly until fully seated.
- Install the rear door trim panel. Refer to
Rear Side Door Trim Panel Replacement
.
- Raise the rear door window.