GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2003 🢒 Century 🢒 Body and Accessories 🢒 Doors 🢒 Front Side Door Inside Handle Bezel Replacement

Removal Procedure

    Important: The bezel on the front inside door handle has an electrical connector for the power door lock system.

  1. Remove the inside door handle bezel screw.

    2. Object Number: 689879 Size: SH
  2. Using a small, flat-bladed tool, remove the inside door handle bezel from the door trim panel.
  3. Remove the inside door lock electrical connector.
  4. Remove the inside door handle bezel from the vehicle.

Installation Procedure

    Object Number: 689879 Size: SH
  1. Connect the door lock electrical connector to the inside door handle bezel.
  2. Press the bezel onto the door trim panel.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the bezel screw to the inside door handle.

    4. Tighten
    Tighten the screw to 2 N·m (18 lb in).