GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2003 🢒 Century 🢒 Body and Accessories 🢒 Seats 🢒 Power Seat Switch Replacement

Removal Procedure
  1. Remove the front seat cushion outer trim panel. Refer to Front Seat Trim Panel Replacement .

    2. Object Number: 522213 Size: SH
  2. Remove the screws from the seat switch to the trim panel.

    3. Object Number: 522226 Size: SH
  3. Disconnect the electrical connector from the power front seat switch.
  4. Remove the power front seat switch from the vehicle.

Installation Procedure

    Object Number: 527143 Size: SH
  1. Connect the electrical connector to the power front seat switch.

    2. Object Number: 527144 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the screws to the seat switch to the trim panel.

    3. Tighten
    Tighten the screws to 3 N·m (27 lb in).

  3. Install the front seat cushion outer trim panel. Refer to Front Seat Trim Panel Replacement .