GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2003 🢒 Century 🢒 Body and Accessories 🢒 Interior Trim 🢒 Roof Rail Rear Assist Handle Replacement

Removal Procedure

    Object Number: 784597 Size: SH
  1. Pull the assist handle (3) down to expose the retaining screw covers (2).
  2. Lift the covers and remove the retaining screws (1).

    3. Object Number: 784599 Size: SH
  3. Pull the handle and the bezel away from the headliner and disconnect the lamp electrical connector (3).
  4. Remove the assist handle from the vehicle.

Installation Procedure

    Object Number: 784599 Size: SH
  1. Position the assist handle by the headliner.
  2. Connect the lamp electrical connector (3).

    3. Object Number: 784597 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the assist handle retaining screws (1).

    4. Tighten
    Tighten the screws to 3 N·m (27 lb in).

  4. Close the screw covers (2) and return the handle to the upright position.