Removal Procedure
- Remove the steering column
trim covers. Refer to
Steering Column Trim Covers Replacement
.
- Rollback the shift lever boot.
- Remove the shift lever screw (3).
- Remove the shift lever assembly (4).
- Remove the shift lever seal (2) from the shift lever assembly (4).
Installation Procedure
- Install the shift lever
seal (2) onto the shift lever assembly (4).
Notice: Refer to Fastener Notice in the Preface section.
- Install the shift lever assembly (4) and secure it with the shift
lever screw (3).
Tighten
Tighten the screw to 20 N·m (15 lb ft).
Important: The shift lever boot must be seated inside the trim covers.
- Slide the shift lever boot into the trim covers.
- Install the steering column trim covers. Refer to
Steering Column Trim Covers Replacement
.