GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 362096  Size: SH
  1. Remove the rear shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement in Interior Trim.
  2. Loosen the rear of the headliner. Refer to Headlining Trim Panel Replacement in Interior Trim.
  3. Disconnect the rear window antenna lead from the rear window antenna connector.
  4. Remove the antenna module bolt.
  5. Disconnect the antenna module electrical connector.
  6. Disconnect the antenna coaxial cable.
  7. Remove the antenna module.

Installation Procedure

  1. Install the antenna module.

  2. Object Number: 362096  Size: SH
  3. Connect the antenna coaxial cable to the antenna module.
  4. Connect the antenna module electrical connector.
  5. Notice: Refer to Fastener Notice in the Preface section.

  6. Install the antenna module bolt.
  7. Tighten
    Tighten the bolt to 3 N·m (27 lb in).

  8. Connect the antenna lead to the rear window antenna connector.
  9. With tape, secure the wiring harnesses to the inner upper panel of the rear window.
  10. Install the headliner. Refer to Headlining Trim Panel Replacement in Interior Trim.
  11. Install the rear shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement in Interior Trim.