Tools Required

1. Remove the strut from the vehicle. Refer to Strut Assembly Replacement .
2. Install the strut (2) in the J 45400  (1).




Important: The spring is compressed when the strut moves freely.

3. Turn the spring compressor forcing screw (1) until the coil spring (2) is compressed.



4. Use a 45 TORX® socket in order to hold the strut shaft. Remove the upper strut mount nut by turning with J 42991 .
5. Remove the strut from the J 45400 .



6. Loosen the compressor forcing screw (1) until the upper strut mount and coil spring (2) may be removed.
7. Remove the upper strut mount and the coil spring from the J 45400 .

1. Install the coil spring and upper strut mount to the J 45400 .
2. Turn the spring compressor forcing screw (1) until the coil spring is compressed.
3. Install the strut to the coil spring and upper strut mount.




Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

4. Install the strut retaining nut.

Using the J 42991 and a 45 TORX® socket, install the strut mount nut.

Tighten
Tighten the strut mount nut to 85 N·m (63 lb ft).

5. Remove the strut from the J 45400 .
6. Install the strut to the vehicle. Refer to Strut Assembly Replacement .