Removal Procedure
- Remove the windshield
side garnish moldings. Refer to
Windshield Pillar Garnish Molding Replacement
in Interior Trim.
Important: Remove the instrument panel (IP) upper trim panel slowly. The retainer
clips could possibly fall into the IP.
- Lift the IP upper trim panel up approximately 51 mm (2 inches).
Pull rearward to release IP upper trim panel retainers.
- Remove the sun load temperature sensor from the IP upper trim
panel.
- Remove the IP upper trim panel from the IP.
Installation Procedure
- Position the instrument
panel (IP) upper trim panel to the IP.
- Install the sun load temperature sensor to the IP upper trim panel.
- Align the IP upper trim panel locating pins and retainers to the
slots in the IP.
- Press down and forward on the IP upper trim panel until fully
seated.
- Install the windshield side garnish moldings. Refer to
Windshield Pillar Garnish Molding Replacement
in Interior Trim.