GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2000 🢒 Century (China) 🢒 Transmission/Transaxle 🢒 Automatic Transaxle - 4T65-E 🢒 Shift Indicator Cable Replacement

Removal Procedure
  1. Remove the steering column. Refer to Steering Column Replacement in Steering Wheel and Column-Tilt.

    2. Object Number: 161187 Size: SH
  2. Pull out the shifter indicator cable clip from the square hole in the steering column at the top.

Installation Procedure

    Object Number: 161188 Size: SH

    Important: Ensure the cable is NOT pinched during the installation procedure.

  1. Route the shift indicator cable down from the instrument cluster.
  2. Route the shift indicator cable underneath the shifter cable and along the side of the column.
  3. Slide the shift indicator cable through the slot.
  4. Push the connector into the T-adjuster.

    5. Object Number: 161187 Size: SH
  5. Snap in the shift indicator cable clip into the square hole in the steering column from the top.
  6. Install the steering column. Refer to Steering Column Replacement in Steering Wheel and Column-Tilt.