Ambient Light Sensor: The scan tool displays 0.0-5.0 volts, depending on the light intensity.

Park Brake Switch: The scan tool displays ON/OFF. The input of the park brake switch is displayed as ON when the park brake is ON.

LCM lights on Chime: The scan tool displays ON/OFF. The input of the LCM lights on chime is displayed as ON when the headlamps switch is ON, with the ignition off, and the key removed.

Courtesy Switch: The scan tool displays ON/OFF. The input of the courtesy switch is displayed as ON when the courtesy lamps are command ON.

Courtesy Ground: The scan tool displays Present/Not Present. The input of the courtesy ground is displayed as Not Present when the ground for the courtesy lamps is not detected.

RH Turning Signal Switch.: The scan tool displays Inactive/Active. The input of the RH Turning Signal Switch is displayed as active if the turn signal switch is activated in the turn right position.

LH Turning Signal Switch: The scan tool displays Inactive/Active. The input of the LH Turning Signal Switch is displayed as active if the turn signal switch is activated in the turn left position.

Headlamp Switch: The scan tool displays Inactive/Active. The input of the headlamp switch is displayed as active when the headlamp lamps are command ON.

Inadvert. Power Output: The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the Inadvert. power output is present.

Front Fog Lamp Relay: The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the fog lamps are turned on.

Backup Lamp Relay:  The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the backup lamps are turned on.

Right Turn Signal: The scan tool displays ON/OFF. This output of the BCM is displayed as ON, if the turn signal switch is activated in the turn right position.

Left Turn Signal:  The scan tool displays ON/OFF. This output of the BCM is displayed as ON, if the turn signal switch is activated in the turn left position.

Headlamps: The scan tool displays ON/OFF. This output of the BCM is displayed as ON, if the BCM commands the headlamps ON.

Parklamps: The scan tool displays ON/OFF. This output of the BCM is displayed as ON, if the BCM commands the parklamps ON.

Low Beam Input: The scan tool displays ON/OFF. This output of the BCM is displayed as ON if the BCM commands the low beam headlamps ON.

Theater Dimming #1: The scan tool displays ON/OFF. This output of the BCM is displayed as ON, if the BCM commands the courtesy lamps to dim.