Important: Always maintain cleanliness when servicing fuel system components.

1. Remove the modular fuel sender assembly. Refer to Fuel Sender Assembly Replacement .
2. Remove the fuel level sensor (5) from the modular fuel sender.

1. Install the fuel level sensor (5) to modular fuel sender.
2. Install the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .
3. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.
4. Inspect for fuel leaks.

4.1.	Turn ON the ignition, for 2 seconds

4.2.	Turn OFF the ignition, for 10 seconds.

4.3.	Turn ON the ignition.

4.4.	Inspect for leaks.