Was the Instrument Cluster Diagnostic System Check performed?

--

Go to Step 2

Go to Diagnostic System Check - Instrument Cluster

1. Install a scan tool.
2. Turn the ignition switch to the RUN position.
3. WOW the instrument cluster on.

Does the engine coolant indicator come on when commanded?

--

Go to Step 3

Go to Step 4

1. Leave the scan tool connected.
2. WOW the instrument cluster off.

Does the indicator turn off when commanded?

--

Go to Powertrain On Board Diagnostic (OBD) System Check in Engine Controls - 2.5L (LB8) and 3.0L (L46)

Go to Step 4

1. Replace the instrument cluster. Refer to Instrument Cluster Replacement .
2. Inspect the system.

Is the repair complete?

--

System OK

--