- Remove the upper and lower trim covers. Refer to
Steering Column Trim Covers - Disassemble - Off Vehicle
.
- Remove the wire harness
strap (2) from the steering column and the wire harness assembly (1).
- Slide the 2 connectors (2)
of the turn signal and multifunction switch assembly out of the bulkhead connector (1).
- Remove the key alarm connector (1)
from the lock module assembly (2).
4.1. | Rotate the key alarm connector (1) 90 degrees. |
4.2. | Pull the key alarm connector (1) out of the lock module
assembly (2). |
- Remove the 2 tapping
screws (2) from the ignition and key alarm switch assembly (1).
- Remove the ignition and key alarm switch assembly (1) from
the lock module assembly.