The RCDLR sends a message to the BCM, through CKT 377, in order to unlock the driver's door upon pressing the UNLOCK button on the keyless entry transmitter 1 time.

The RCDLR sends a message to the BCM, through CKT 377, in order to unlock all of the doors upon pressing the UNLOCK button on the keyless entry transmitter 2 times (allowing no more than 5 seconds to elapse between presses).

The RCDLR send a message to the BCM. through CKT 377, in order to lock all of the doors upon pressing the LOCK button on the keyless entry transmitter 1 time. The following features alter the normal remote door locking operation:

Refer to Power Door Locks Circuit Description in Doors for more information on the lockout prevention feature and the last closed door locking feature.

When the ALARM button on the keyless entry transmitter is pressed, the RCDLR sends a message to the BCM. The message is sent to the BCM through CKT 377 in order to flash the headlamps and sound the horn alternately for 2 minutes. Press the alarm button a second time in order to stop the remote alarm.

When the REAR COMPARTMENT button on the keyless entry transmitter is pressed, the RCDLR sends a message to the BCM through circuit 377. The BCM energizes the rear compartment lid release relay and applies voltage to CKT 56. The rear compartment lid lock release actuator energizes and releases the rear compartment lid.

If the transmission/ transaxle is shifted out of the PARK position, the rear compartment lid release feature is disabled.

The BCM turns ON the courtesy lamps when unlocking the doors with the keyless entry transmitter. Refer to Diagnostic System Check - Lighting Systems in Lighting Systems.