Important: The lower door moldings upper retainers may possibly break and will require replacement.

1. Remove lower door moldings upper retainers by pulling from the door starting from the front edge and working rearward.
2. Slide the lower door moldings down and off of the lower door molding support.
3. Remove the lower door molding from the door.



4. Pull out the center pins of the lower door molding support retainers.
5. Remove the lower door molding retainers from the lower door molding support.
6. Remove the lower door molding support from the door.

1. Replace all damaged retainers.



2. Align the lower door molding support to the holes in the door panel.
3. Install the lower door molding support retainers to the lower door molding support.
4. Press in the center pins of the lower door molding support until fully seated.




Important: The door must be open during molding installation.

5. Position the bottom flange of the lower door molding behind the lower edge of the lower door moldings support.
6. Align the lower door moldings upper retainers to the holes in the door panel.
7. Press the lower door moldings upper retainers into the holes working from the front to the rear, until the retainers are fully seated.