GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 467676  Size: SH

    Important: You can replace the mirror face without removing the entire mirror housing.

  1. Carefully push the mirror face on one end to gain access to the retainer on the rear side.
  2. Carefully pull the mirror face in order to disengage the mirror face from the mirror housing.
  3. Disengage the plastic clips on the back side of the mirror face.
  4. Remove the mirror face from the mirror housing.

Installation Procedure


    Object Number: 467676  Size: SH
  1. Position the mirror face on the mirror housing.
  2. Press the mirror face into the mirror housing until fully seated.