GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2000 🢒 Century (China) 🢒 Body and Accessories 🢒 Doors 🢒 Front Side Door Wiring Conduit Replacement

Removal Procedure

    Object Number: 308354 Size: SH
  1. Remove the door rubber conduit (1) from where it attaches at the the windshield pillar.
  2. Carefully pull the wire harness out from the windshield pillar to expose the harness connector.
  3. Disconnect the door wiring harness electrical connector.
  4. Remove the conduit from the door and remove it from the electrical harness.

Installation Procedure

    Object Number: 308354 Size: SH
  1. Thread the door electrical harness through the rubber conduit.
  2. Install the conduit (1) into the door.
  3. Connect the door wiring harness electrical connector.
  4. Install the conduit into the windshield pillar.