GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 319887  Size: SH
  1. Lift the plastic cover to expose the coat hook screw.
  2. Remove the coat hook screw.
  3. Remove the coat hook (4) from the headliner.

Installation Procedure


    Object Number: 319887  Size: SH
  1. Position the coat hook (4) by the headliner.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the coat hook screw.
  4. Tighten
    Tighten the coat hook screw to 2 N·m (18 lb in).

  5. Press the plastic cover over the coat hook screw.